Size without handle: 130mm x 185mm x 185mm (5.1 x 7.2 x 7.2 inch) (nominal)
Ni-MH Rechargeable Battery with 4 hour battery life
Fast 5 second start up time
Sensor Type - Uncooled Microbolometer
Dynamic Scene Colorisation (DSC) Colorises the thermal image to allow the firefighter to pinpoint the hottest areas within the fire scene.
Direct Temperature Measurement (DTM) Displays the temperature of objects within a defined area of the thermal scene.
SceneSave™ Digital Image Capture - The Argus4 can capture and store up to 100 images. These can then be viewed or deleted using the remote control supplied. Using the software provided, the captured images can be downloaded to a suitable laptop/PC and exported in *.bmp format.
Tri-Mode Sensitivity Microbolometer cameras have two modes of sensitivity, high and low; Argus™4 now has a third level of sensitivity for very high scene temperatures to enable clear imagery at all temperatures.
Customisable Start-up Screen Brigade logos or station names can be added to the start-up screen for asset tracking and/or personalization of the camera.
Ambient Temperature Measurement - A sensor fitted to the front of the camera, which measures the ambient temperature of the local environment. The temperature is displayed on the viewing screen.
x2 Zoom Allows the user to zoom in on the scene, from a distance, for improved investigation and identification of hot spots and dangers
Time and Date The time and date is displayed at the top of the viewing screen.
Remote Control - The Argus4 is supplied with a remote control that allows the end user to adjust LCD settings, set the dynamic scene colorisation and set the time and date. Stored images can be reviewed and deleted.
Power for the Argus4 is provided by an integral battery pack located on the top of the camera. The camera has a single on/off button with a delayed off operation to prevent accidental power-down during use. The camera will display a start-up screen until a useable thermal image is produced.
All Argus4 cameras are constructed from high quality Radel®R- 5100, which has been chosen for its strength, resistance to heat, water and impact. Protection from shock is provided by a combination of rugged components, optimum mechanical design and protective bumpers. The camera is sealed to allow short-term total immersion in water (IP67).
The camera is supplied with side straps and a removable handle, which provides flexible operation and transfer between users.
No end-user maintenance is required other than echarging of batteries and post-use external cleaning with a soft cloth.
FireRescue1 encourages its members to discuss this product in the comments section below. You must be a registered member of FireRescue1 to post a comment. The comments below are member-generated and do not necessarily reflect the opinions of FireRescue1 or its staff.
