Pierce Arrow XT Equipped with Innovative and Versatile Snozzle Aerial Device on Duty in Elizabeth, N.J.


APPLETON, Wis. (November, 2014) – Pierce Manufacturing, an Oshkosh Corporation (NYSE:OSK) company, placed a Pierce® Arrow XT™ custom firefighting apparatus, equipped with a Snozzle® High Reach Extendable Turret (HRET) featuring a piercing nozzle, at the Elizabeth Fire Department located in Elizabeth, N. J. The vehicle, expected to respond to over 1,000 calls per year, will also operate as a specialized foam pumper. It joins three other Pierce Arrow XT vehicles purchased by the department within the past year.

“The tough and reliable Pierce Arrow XT, matched with the innovative Snozzle HRET, is a powerful combination for a wide range of emergency responses,” said Jim Johnson, Oshkosh Corporation executive vice president and president, Fire & Emergency. “The fast set-up time and penetrating nozzle technology allow firefighters to quickly discharge more extinguishing agent directly where it is needed – while keeping them farther out of harm’s way.”

Elizabeth FD also purchased a Ford F-450 utility vehicle that carries a 1,000-pound dry chemical system to supply dry chemical powder to the Snozzle apparatus. Additionally, in the past year, the department purchased three Pierce Arrow XT vehicles including a stock pumper, a 2,000-gpm pumper, and a 100-foot aerial ladder.
In addition to industrial, commercial, and residential areas, the Elizabeth Fire Department’s protection district includes portions of Newark International Airport as well as a major portion of the largest container seaport on the East Coast. The Snozzle is a versatile device that operates above or below grade, and can pierce a shipping container. When operating as a foam pumper, the apparatus will enhance the fire department’s foam-making capabilities. 

Built on the Arrow XT chassis with dual rear axles, the Snozzle-equipped vehicle sports a 500-hp engine, five-speed pushbutton transmission, and a Command Zone™ advance electronics system. The 10-inch raised roof cab provides seating for six firefighters, includes a pair of forward facing EMS cabinets, and is equipped with Pierce’s front impact and side roll protection systems. The vehicle also features a 750-gallon water tank, dual deck guns, a 2,000-gpm pump, a Husky® 60 foam system, a Hydrochem nozzle, and a 300-gallon foam cell.

The Pierce-exclusive Snozzle HRET, with a hardened carbide steel tip and a perforated nozzle, enables firefighters to penetrate virtually any material in a building, cargo container, or other structure. Its ability to discharge from 20 feet below grade to elevations as high as 65 feet gives the apparatus maximum versatility. Click here (http://youtu.be/D7S_rTftziY) to watch a walk-around video of the apparatus.
Established 350 years ago, the City of Elizabeth is New Jersey’s birthplace and, today, is a hub for transportation, shipping, and industrial and retail businesses. The first fire company in Elizabeth (Protection Engine Co. 1) was established in 1789. Today, the Elizabeth Fire Department is comprised of 269 firefighters and more than 50 EMS personnel.

Pierce dealer, Fire & Safety Services of South Plainview, N.J., provides local service and support through its full service facilities and seven trained mechanics.

Photo Caption: Pierce has placed a Pierce® Arrow XT™ custom firefighting apparatus equipped with a Snozzle High Reach Extendable Turret (HRET) at the Elizabeth Fire Department located in Elizabeth, N. J. (Photo credit: Gary Haszko.)

 

About Pierce Manufacturing
Pierce Manufacturing Inc., an Oshkosh Corporation [NYSE: OSK] company, is the leading North American manufacturer of custom fire apparatus. Products include custom and commercial pumpers, aerials, rescue trucks, wildland trucks, minipumpers, elliptical tankers, and homeland security apparatus. In addition, Pierce designs its own foam systems and was the first company to introduce frontal airbags and the Side Roll Protection system to fire apparatus. To learn more about Pierce, visit www.piercemfg.com.

About Oshkosh Corporation
Oshkosh Corporation is a leading designer, manufacturer and marketer of a broad range of specialty access equipment, commercial, fire & emergency and military vehicles and vehicle bodies. Oshkosh Corporation manufactures, distributes and services products under the brands of Oshkosh®, JLG®, Pierce®, McNeilus®, Jerr-Dan®, Frontline™, CON-E-CO®, London® and IMT®. Oshkosh products are valued worldwide in businesses where high quality, superior performance, rugged reliability and long-term value are paramount. For more information, please visit to www.oshkoshcorporation.com.

Forward-Looking Statements
This press release contains statements that the Company believes to be “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. All statements other than statements of historical fact, including, without limitation, statements regarding the Company’s future financial position, business strategy, targets, projected sales, costs, earnings, capital expenditures, debt levels and cash flows, and plans and objectives of management for future operations, are forward-looking statements. When used in this press release, words such as “may,” “will,” “expect,” “intend,” “estimate,” “anticipate,” “believe,” “should,” “project” or “plan” or the negative thereof or variations thereon or similar terminology are generally intended to identify forward-looking statements. These forward-looking statements are not guarantees of future performance and are subject to risks, uncertainties, assumptions and other factors, some of which are beyond the Company’s control, which could cause actual results to differ materially from those expressed or implied by such forward-looking statements. These factors include the cyclical nature of the Company’s access equipment, commercial and fire & emergency markets, which are particularly impacted by the pace of U.S. and European economic recoveries; the strength of emerging market growth and projected adoption rate of work at height machinery; the expected level and timing of DoD and international defense customer procurement of products and services and funding thereof; risks related to reductions in government expenditures in light of U.S. defense budget pressures, sequestration and an uncertain DoD tactical wheeled vehicle strategy, including the Company’s ability to successfully manage the cost reductions required as a result of lower customer orders in the defense segment; the Company’s ability to win a U.S. Joint Light Tactical Vehicle production contract award; the Company’s ability to increase prices to raise margins or offset higher input costs; increasing commodity and other raw material costs, particularly in a sustained economic recovery; risks related to facilities consolidation and alignment, including the amounts of related costs and charges and that anticipated cost savings may not be achieved; the duration of the ongoing global economic uncertainty, which could lead to additional impairment charges related to many of the Company’s intangible assets and/or a slower recovery in the Company’s cyclical businesses than Company or equity market expectations; risks related to the collectability of receivables, particularly for those businesses with exposure to construction markets; the cost of any warranty campaigns related to the Company’s products; risks related to production or shipment delays arising from quality or production issues; risks associated with international operations and sales, including foreign currency fluctuations and compliance with the Foreign Corrupt Practices Act; the Company’s ability to comply with complex laws and regulations applicable to U.S. government contractors; the impact of severe weather or natural disasters that may affect the Company, its suppliers or its customers; the impact of cyber security risk and costs of defending against, mitigating and responding to a data security breach; and risks related to the Company’s ability to successfully execute on its strategic road map and meet its long-term financial goals. Additional information concerning these and other factors is contained in the Company’s filings with the Securities and Exchange Commission. All forward-looking statements speak only as of the date of this press release. The Company assumes no obligation, and disclaims any obligation, to update information contained in this press release. Investors should be aware that the Company may not update such information until the Company’s next quarterly earnings conference call, if at all.

Join the discussion

Brand Focus

Sponsored content
How to manage staffing for a crisis or disaster more efficiently (white paper)

How to manage staffing for a crisis or disaster more efficiently (white paper)

Automated scheduling technology can help public safety agencies with employee notification and cost recovery for emergency staffing

Copyright © 2019 FireRescue1.com. All rights reserved.